Loctite® cleaners and degreasers are highly effective and are available in both aqueous and solvent-based formulations. When choosing a cleaner or degreaser, the major factors to consider are dry time, residue, odor, and substrate compatibility. Residue is a particularly important concern because if there is any secondary processing of the part, e.g. painting or bonding, a residue could interfere with that process. Substrate compatibility is commonly a concern when dealing with plastics and solvent-based cleaners.

DEGREASERS

LOCTITE NATURAL BLUE BIODEGRADABLE CLEANER & DEGREASER

All purpose, industrial strength, concentrated cleaner and degreaser. Can be economically diluted with water. Natural Blue® is formulated for wipe down, pressure spraying, and immersion cleaning processes – at room temperature or heated. Pinescented, non- flammable, and non- toxic. Contains no ozonedepleting chemicals (ODCs). CFIA approved.

LOCTITE NATURAL BLUE BIODEGRADABLE CLEANER & DEGREASER

Fragrance-Free
Same product as Loctite® Natural Blue® Biodegradable Cleaner & Degreaser but without the fragrance. It can be used in all departments of a food processing plant. Contains no ozone-depleting chemicals (ODCs). CFIA approved.

LOCTITE AQUA POWER BIODEGRADABLE CLEANER & DEGREASER

Penetrates, dissolves and removes dirt and oil. Fast drying and residue -free. Environmentally friendly product is biodegradable, has low toxicity, contains no ozone- depleting chemicals (ODCs), and is non-corrosive/non-caustic.

LOCTITE ODC-FREE CLEANER& DEGREASER (NAPHTHA)

A non-aqueous, hydrocarbon-based solvent designed for cleaning and degreasing surfaces to be bonded with adhesives, as well as for general purpose industrial cleaning. Safe on aluminum, rubber and most plastics, and will not cause flash rusting on water sensitive parts. Dries residue-free. Contains no ozone-depleting compounds. Formerly referenced as 7070.) SF K1 approved.

LOCTITE RO STRENGTH DEGREASER

Quickly dissolves and removes grease, oil, and dirt from iron, steel, aluminum, magnesium, copper, rubber, plastic, and concrete. Rinses off with water.

ELECTRICAL CLEANERS

LOCTITE ELECTRICAL CONTACT & PARTS CLEANER

Fast-evaporating cleaner removes grease, oil, and other contaminants from electrical parts and mechanical equipment. Contains no CFCs or HCFCs and is safe on most plastics. Non- conductive, non-corrosive.

LOCTITE ELECTRICAL CONTACT CLEANER

Non-Flammable
Removes grease, oil, and other contaminants from electrical parts to prevent contact failure. Dries residue -free in seconds. Non-conductive, non- corrosive, non- flammable. Contains no CFCs or Class I ozone-depleting chemicals (ODCs). Contains HCFC-141b. May attack some sensitive plastics.

LOCTITE NON-FLAMMABLE ELECTRICAL CONTACT CLEANER

Use as an electrical contact cleaner to remove grease, dirt, oil, and other surface contaminants from sensitive electrical /electronic parts. Non- flammable, fast evaporating and leaves no residue. Contains no HCFCs or CFCs.

GASKET REMOVERS

LOCTITE CHISEL GASKET REMOVER (METHYLENE CHLORIDE)

Removes gaskets from any type of assembly in 10 to 15 minutes. Prepares metal parts for new gaskets, eliminating scraping and sanding. Works on wood; noncorrosive on aluminum. Not for use on plastics, linoleum, or synthetic fibers. CFIA approved.

LOCTITE CHISEL MC-FREE GASKET REMOVER

Free of Methylene Chloride, Loctite® Chisel® MC-Free Gasket Remover has a foaming action that lifts off gaskets from any type of assembly in minutes. Performs better than Methylene Chloride formulations on silicone gaskets and removes most spray paints from steel panels in less than 30 seconds. Convenient spray liquid penetrates and cleans intricate shapes and will not run off, even on vertical surfaces. Suitable for wood and plaster. Not for use on plastics, linoleum, or synthetic fibers.

GLASS CLEANER/HAND WIPES

LOCTITE MULTI-PURPOSE GLASS CLEANER

Fast-acting, professional strength cleaner removes tough grease and dirt from glass, chrome, aluminum, stainless steel, and enamel finishes. Orange-scented formula will not run or streak. Contains no ozone-depleting chemicals (ODCs).

LOCTITE® INDUSTRIAL HAND WIPES

Pre-moistened with a powerful citrus-scented cleaning formula that is abrasive enough to scrub off the toughest grease and grime. Quick and easy - to-use, these 9.5" x 12" towels eliminate rinsing and drying and leave no residue behind. Perfect for industrial and commercial environments in the painting, printing, maintenance, transportation, and construction industries.

PARTS CLEANERS

LOCTITE NON-CHLORINATED PARTS CLEANER

Penetrates, dissolves, and removes dirt and oil from metal parts. Leaves no residue. Does not contain 1,1,1-trichlorethane; helps manage EPA halide limits.

LOCTITE PRO STRENGTH PARTS CLEANER

Aggressively penetrates, dissolves, and removes oil and grease from parts. Dries quickly with no residue. Contains no ozone-depleting chemicals (ODCs).

LOCTITE 768™ X-NMS CLEAN-UP SOLVENT

Quickly and safely dissolves cured cyanoacrylate -based adhesives.

STRIPPER /VARNISH REMOVERS

LOCTITE  PRO STRENGTH VARNISH REMOVER

Super jet spray quickly cuts and removes grease, gum, and varnish from chokes, baffle plates, and carburetor linkage. Improves performance and fuel efficiency.

LOCTITE  INDUSTRIAL STRENGTH PAINT STRIPPER

Quickly strips and removes paint. Eliminates sanding and scraping. Works in 10 to 15 minutes at temperatures from -40°F to 100°F. Contains no ozone-depleting chemicals (ODCs).